About Us
Schedule
Rules
Results
Tracks
OHORA Discussion Forum
Contact Us
Home Page

Canadian HO Slot Car Bulletin Board

 
SS T-Jet Rules A/FX - Magnatraction Rules Stock SG+ Rules Modified Rules  

Body Rules:

1. Any bodies designed to work with the stock SG+ mounting clip or the Tyco 440-X2 Narrow chassis shall be legal unless a specific class has been predetermined (ie open wheel, GTP, Can-Am, etc).

2. No cutting or lightening of the body is allowed.

3. Body must be complete at start of race (ie bumpers and/or windows, etc must be intact).

NOTE: Unless otherwise stated we will be using Open Wheel/Indy type bodies. Drivers may attach a small piece of plastic to the front wing with two sided foam tape to help prevent broken wings.

Chassis Rules: Tomy SG+, Tyco Narrow

1.Stock SG+ traction magnets only (black or grey are legal). Tyco may use Phase II polymer.

2. Rear axle on the SG+ may be held in place with Tomy OEM rear chassis clip. Clip may not be cut or modified in any way. Tyco rear axle may not be held in place.

3. Rear rims may be replaced with any single or double flange units so that slip on silicone tires may be used.

4. Stock Tomy and Tyco front rims/tires must be used.

5. Stock Tomy SG+ 25 tooth or stock Tomy Turbo 22 tooth crown gear may be used in the SG+. Only the stock 25 tooth Tyco crown may be used in the Tyco.

6. All electricals shall be stock or stock replacement. Narrow gap stock armatures only with a single pole resistance not less than 5.8 ohms measured pole to pole at room temperature. Ski shoes are considered stock replacements and shall be legal. (NO silver or gold plated parts).

7. Stock Tomy & Tyco guide pins shall be used in there respective cars and may be glued in place.

8. Helper springs are not legal on the SG+..

9. Any other modifications will be considered illegal unless cleared be the Tech committee.

 

 

This site brought to you in part by Scale Auto Racing News
- Best Viewed at 800x600 -