Body Rules:

1. Stock Tyco/Mattel pan chassis NASCAR (unless noted). Body may be secured to chassis with double sided tape or velcro but must maintain removablility.

2. No cutting or lightening of the body is allowed.

3. Body must be complete at the start of a race. (ie. windows intact). Windows may be glued to body.

Chassis Rules: Tyco/Mattel pan style only

1. Tyco/Mattel pan chassis only. (black or grey chassis legal).

2. Motor magnets must be stock ceramic Tyco/Mattel with stock polarity.

3. Stock Tyco/Mattel guide pin must be used and may be glued in place.

4. Stock Tyco/Mattel pan chassis front axle/rims/tires must be used. Front tires may not be cut or sanded in any way.

5. Any slip-on silicone rear tires are permitted on any single/double flange hub, however silicone foam rear tires are not allowed.

6. Stock Tyco/Mattel gears and gear ratio must be used.

7. Stock Tyco/Mattel gear spacer may be lightened.

8. Stock Tyco/Mattel or stock replacement electrical components only. Stock Tyco/Mattel pickup shoes may have the step removed (ie. be flattened ). Aftermarket 'ski' type pickup shoes may be used and may be silver plated. Double pick-up shoe springs may be used in place of the stock units.

9. Stock Tyco/Mattel ceramic traction magnets may be replaced with Wizzard "Phase II" or BSRT "Poly-Force" units.

10. Stock Tyco/Mattel armatures only. NO rewinds, dewinds, balancing, etc. Wide gap armatures and soldered tabs are not permitted.

11. Pick-up shoe tabs may be reinforced.

12. Chassis may not be cut, sanded or modified in any other way.

13. Any other modifications will be considered illegal unless cleared by the Tech committee.