Body Rules:

1. Body must be a stock Tyco body which may be secured to chassis with double sided tape or velcro, but must maintain removablility. Body type is determined by class (ie. NASCAR or GT style).

2. No cutting or lightening of the body is allowed.

3. Body must be complete at the start of a race. (ie. windows intact). Windows may be glued to body.

Chassis Rules: Tyco/Mattel pan style only

1. Tyco/Mattel pan chassis only. (black or grey chassis legal).

2. Motor magnets must be stock ceramic Tyco/Mattel with stock polarity.

3. Stock Tyco/Mattel guide pin must be used and may be glued in place.

4. Stock Tyco/Mattel pan chassis front axle/rims/tires must be used. Front tires may not be sanded and trued.

5. Any slip-on silicone rear tires are permitted on any single/double flange hub, silicone foam rear tires are not allowed.

6. Stock Tyco/Mattel gears and gear ratio must be used.

7. Stock Tyco/Mattel gear spacer may be lightened.

8. Stock Tyco/Mattel or stock replacement electrical components only. Stock Tyco/Mattel pickup shoes may have the step removed (ie. be flattened ). Aftermarket 'ski' type pickup shoes may be used. Stock pick-up shoe springs must be used.

9. Stock Tyco/Mattel ceramic traction magnets must be used

10. Stock Tyco or Stock Tyco armatures by Wizzard only. NO rewinds, dewinds, balancing, etc. Wide gap armatures and soldered tabs are not permitted.

11. Pick-up shoe tabs may be reinforced.

12. Chassis may not be cut, sanded or modified in any other way.

13. Any other modifications will be considered illegal unless cleared by the Tech committee.